Warning: Last items in stock!
Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot™ rail.
They are added to one side of a set of wheels on a gantry plate.
The eccentrics give an aprox 0.79mm adjustmnet range allow for a very strong and scruce connection between the V rail and wheel.
The OpenBuilds Part Store Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the cam hole is.
Adjustments are made with a 10mm wrench for the full size eccentrics and an 8mm wrench for the mini size eccentrics
Use these with our family of OpenBuilds wheels.
Vslot 40x40 rails
8mm Metric Lead Screw / ACME
GT3 Timing Pulley - 20 Tooth - High Torque...
GT2 (2mm) Aluminum Timing Pulley - 20
Mini V Wheel Plate™
Emergency stop Button
GT3 Timing Pulley - 40 Tooth - High Torque Series
8mm Acme Nut Block
5mm x 8mm Flexible Coupling
Xtrem Mini Wheel kit
XLR Connector Panel (Chassis) Mount Kit 4 Pins...
3GT (GT2-3M) Timing Pulley - 20 Tooth - 9mm...