Xtrem Solid Wheel Kit
Warning: Last items in stock!
The OpenBuilds Solid Xtreme Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind.
These solid Xtreme V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better over all precision and strengh for your builds.
The Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V Wheels work great for most light load applications the OpenBuilds Solid V Xtreme wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.
The OpenBuilds Team have tested these wheels at 25lbs. per wheel with no noticable deflection. Beta testing resulted in unofficial results of 55lb.s per wheel!
Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
Each wheel is carefully milled for consistent high precision and tolerance.
Wheel Kit Includes all you need:
The OpenBuilds Solid Xtreme V Wheel is great for use with the V-Slot Linear Guide System.
NOTE: The installation of this V wheel is identical to the OpenBuilds V Wheel (please see videos for installation)
Example Build: This is the same Solid V Wheel we are using on the OpenBuilds OX cnc router Build and would be a great upgrade for any build!
Vslot 40x40 rails
VSlot Actuator End Mount
GT3 Timing Pulley - 40 Tooth - High Torque Series
3 Holes Joining Strip Plate
18 Gauge 4 Conductors Wire (meter)
CNC xPRO CONTROLLER STEPPER DRIVER V3
C-Beam Linear Actuator Bundle Pack (motor...
C-Beam™ Gantry Plate - Double Wide
OpenBuilds Vslot Rails
Threaded Rod Plate™ for Nema 23 Stepper Motor